Mikrotron MC132x Especificações descarregar pdf (Página 11)

Initial setup MC132x Users Manual Rev. 0.22

5 Initial setup

The MC132x is delivered with initial parameters and therefore does not need to be configured via the

serial link.

5.1 Serial number and firmware revision

Serial number and firmware revision is provided in MC132x non volatile memory. Use :v command

(Read serial number and firmware revision) to read serial number and firmware revision. The serial

number is also marked on the type plate of the camera.

5.2 PowerUpProfile

The PowerUpProfile is the contents of all camera registers to be loaded from non-volatile memory after

power up.

5.3 Camera Profile

The actual set of parameters is called Camera Profile. All changes of parameters by the serial link is

reflected in the Camera Profile. On command the Camera Profile is saved to 8 user profiles or one Pow-

erUpProfile. It is loaded from 8 user profiles or 8 factory profiles or the PowerUpProfile. The camera

profile is volatile and must be stored to the PowerUpProfile to be reactivated on next poer up.

5.4 Factory profile

The factory profile can be read but not written by the user. They are factory preset to the settings de-

scribed in the next chapter (user profiles).

5.5 User profiles

The user can store up to eight PowerUpProfiles in non volatile memory. All load or write commands

exchange data between the PowerUpProfile and one of the four user profiles.

Profil-Nr. Video data

width

/Mbyte/s

resolution

/ pixel

Image

frequency

/fps

0 48,5 100 x 100 4.852

1 58,2 240 x 240 1.011

2 62,1 640 x 480 202

3 61,6 1280 x 1024 47

4 48,5 100 x 100 4.852

5 58,2 240 x 240 1.011

6 62,1 640 x 480 202

7 61,6 1280 x 1024 47

Table 5-1

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 44 45

Sem comentários

Mikrotron MC132x Especificações Página 11